These traditional tools have been used for eons in the stone industry and are still among the most cost-effective tools for splitting stone. Also known as Wedge and Feathers. These tools are the oldest and still one of the best ways to split stone. Small

Samlongda Pneumatic tubing factory !

Made by 100% brand new material.

Keep high quality products for pneumatic system, air tools, hand tools.

Sizes: PU0805, PU1208, PU1612 ect.

brad nailer

1)Light die-casting aluminum alloy body

2)Oxidied aluminum alloy magazine,bottom loading system ,100pcs nails loading capacity

3)nail size :18Ga. 10-50mm

4)Spare parts: oil,allen wrenches,operating manual

5)CE Approval is available

Bulk nails

1) Material: Q195 or Q235

2) Length: 16-200mm

3) 25KG per carton bulk packing, carton size: 25x25x25cm

4) loading qty: 20-26tons per 20'fcl

Lifting Truck

1.Unique flexible drive system

2.Deep cycle sealed battery

3.Up to 250Kg

4.12V or 24VDC Motor option

5.Load sensing device

Model

LTA250A

Battery:

2 x 12V 17 Ah batteries

Height:

1720mm

Width:

570mm

Maximum Load:

250Kg

Lift

handy reinforcing bar strapping tool

Mode

Kp-230

Kp-400A

Size

277*100*270

277*100*290

Weight

2.1kg

2.1kg

Motor voltage

9.6V

9.6V

Max strap diameter

21mm

40mm

Battery box

two

two

Charger

One

One

e

material : ABS

AC:120-240V

DC"12V, 50Hz 70w

could be used widely in air bed, inflating toy,and other outdoor places

MZ7665 air leg rock drill,26kg,cyilnder(dia*stroke:76*70mm),working pressure: 0.4-0.63mpa,impact energy: ≥70,impact ferquency: ≥37,air comsumption: ≤81

Features

1) Innovative design with light weight

2) Rear exhaust to protect work surfaces

3) Steel top cap can be used as hammer at your needed working situation

4) Soft grip handle with extra comfort and control

5) Professional tool with hardened on

QTY:12pcs

G.W/N.W:15/14kgs

MEAS:50*25*50cm

Grouped control mechanism, quick to start up with〝air-on, water-on, air-off〞 mechanism easy handle and maintain. Low noise, small vibration, energy-saving and efficient, highly interchangeable parts with long service life reliable performance. Different f

CN70 max design coil nailer

1)Light die-casting magnesium alloy body

2)Magazine Capacity:225-300pcs nails ,nail dia.:2.3-2.9mm(0.092-0.113inch),length:45mm-70mm(1-3/4-2-3/4inch)

3)"Contact acutation fire mode" or " sequential fir mode" are available

Coil Nailer/ Nail Gun

COIL NAILER CN90 FEATURE:

Shank Dia: 2.87~3.8mm, Length 50 ~ 90mm

Dual action for this tool.

Drives both flat wire welded and plastic sheet collated nails without any adjustment.

Die-casting Magnalium body for ultra-long

KT-32L Pneumatic strapper

strap material

Seal tensile strength

tensioning stength

strap tensioning speed

strap spec

weight

steel strap

≥6.3KN

≥9.8KN/0.6Mpa

5m/min

(25-32)× (0.8-1.2)mm

4.3kg

Maintenance & Rep

Specifications:

110V AC or 12V DC auto cigarette lighter jack

YT28 air leg rock drill,26kg,cyilnder(dia*stroke:60mm*60mm),working pressure: 0.4-0.63mpa,impact energy: ≥70,impact ferquency: ≥37,air comsumption: ≤81

Dimension:510*530*92mm

Weight:5.4kg(11.6Lb)

Required pressure:80~110PSL(5.5-7bar)

Max.pressure:120PSI(8.3bar)

Nail Capacity:100pcs

L,T and staple configuration.

Adjustment-free, ratchet mechanism

Light weight die-cast Alu. Body for less fatigue

Parameter:

SIZE:φ22x400

QTY:100PCS

G.W/N.W:13kg/12kg

MEAS:41x27x28cm

Most suitable for drilling downward and inclined blast-holes in medium nard and hard rock with a hardness of f=8~18: An ideal tool for rock drilling operations in small open-pit quarries, mines, water conservancy projects and road building in hilly areas,

16Ga. heavy-duty air stapler

1)Light die-casting aluminum alloy body N.W.:2.65Kgs/pcs

2)Oxidied aLuminum alloy magazine,top loading system ,100pcs staples loading capacity

3)Staple size:16Ga. crown=10.60MM length:25mm-50mm

4)Other sizes :see attach

pneumatic combination strapper

Seal tensile strength≥6.3KN

tensioning stength≥4.9KN/0.6Mpa

strap tensioning speed:5.5m/min

spec:(16-19)×(0.38-0.8)mm

air pressure:0.42-0.6Mpa

strap material:steel strap

weight:5kg

Maintenance & Rep

Specifications:

1) 120V AC auto cigarette lighter jack

ZY24 air leg rock drill,25kg,cyilnder(dia*stroke:70mm*70mm),working pressure: 0.4-0.63mpa,impact energy: ≥65,impact ferquency: ≥30,air comsumption: ≤67

Light weight with alu. body gun body

Ergonomic design for easy operating.

Steel contact safety with dual carbide inserts for less wear

Soft grip for comfort and control

3149&3518 are available

Dimensiln:346*227*145mm

Weight:2.7kg(5.94Lb)

Required

SIZE:ø55*100mm

QTY:25pcs

G.W/N.W:19/18kgs

MEAS:46*26*39cm

Drill pipe is hollow, thick-walled, steel piping that is used on drilling rigs to facilitate the drilling of a wellbore and comes in a variety of sizes, strengths, and weights but are typically 30 to 33 feet in length. They are hollow to allow drilling fl

Air Nailer

Dongya is a professional manufacturer of high quality air nailers with CE and GS Certificates. Our company began producing air nailers since 1997.

We can manufacture Coil Nailers, Roofing Nailers, Framing Nailers, 2 In 1 Cement & Brad Nai

Pneumatic combination strapping tools

Feature:

1. Easy to use, clever design and easy to move.

2. Special structural design, easy steel, aluminum and other heavy packaging banding

3.durable, all the accessories are made by the

Specifications:

1) 230V AC auto cigarette lighter jack

2) 12V DC auto auto cigarette lighter jack

YT24 air leg rock drill,24kg,cyilnder(dia*stroke:70mm*70mm),working pressure: 0.4-0.63mpa,impact energy: ≥65,impact ferquency: ≥31,air comsumption: ≤67

Features:

1) Model no.: RP8021-A / AS1001A2) Type of feed: gravity

3) Standard nozzle: 1.4mm

4) Optional nozzle: 1.3 - 2.5mm

5) Operating pressure: 2.0 - 3.5 bars

6) Pattern width: 180 - 250mm

7) Air consumption: 4.2 - 7.1cfm

8) Paint capacity:

Parameter:

SIZE:φ38x500

QTY:15PCS

G.W/N.W:18kg/17kg

MEAS:59x24x29cm

Because of economy and powerful drilling capacity, down the hole hammer become an advanced drilling tool for drilling and mining industries. Down the hole hammers and drill bits are designed together to work in perfect unison, giving high penetration rate

2 in 1 combination air tacker

1)Light die-casting aluminum alloy body N.W.:1.35Kgs

2)Oxidied aLuminum alloy magazine,side loading for nail and top loding for staple system ,100pcs nails/staples loading capacity

3)Nails :18Ga. 10-50mm(3/8-2inch)

Stap

pneumatic split strapping tools

Specifications:

1) 230V AC or 12V DC auto cigarette lighter jack

2) 12V DC auto auto cigarette lighter jack

YT23D Air leg rock drill,24kg,cyilnder(dia*stroke:70*70mm),working pressure: 0.4-0.63mpa,impact energy: ≥65,impact ferquency: ≥31,air comsumption: ≤78

Features:

1) Rubber nose-piece protects the working surface

2) Large piston for increased power3) 360-degree adjustable air deflector for appropriate air direction

4) Rubber comfortable grip

5) Safety system protects the operator

6) Tool hook can b

SIZE: φ35X600

QTY: 10pcs

G.W/N.W: 12kg/11kg

MEAS: 65X35X34cm

When it comes to the small-hole drilling tools equipped with pneumatic & hydraulic rock drills,Taper drill equipments is prevailingly used for rock drilling, blasting holes and other drilling works especially in the mining application and dimentional