SOLENNOIDVALES&COIL,BOILER COIL,BOILER,BURNER,IGNITION ELECTRODES&TRANSFORMER,PHOTOCELL,SEQQUENCE CONTROLLER,TEMPERATURE INDICATOR,ALL TYPES OF SENSORS,THERMIC FLUID PUMP,PISTON PUMP&ITS SPARES,BURNER GUN,SIMPLEX/DUPLEX FILTER,PANEL BOARDS,DIF

Known industry wide for their rugged construction and reliability, Gast Air Motors and air powered Gearmotors are available in both lubricated and oilless models .

These air motors and gearmotors are used in many industrial applications, from mixing equip

Description :

This welding positioner make the workpiece at the best welding and fitting position , can become a real automatic welding machine cooperating with the manpulator .can also be the peripheral equipment of the robot and achieve the automation

BOWE FB301 copper brazing copper welding flux (powder), white powder canned products, used for brazing when soldering solvent, solder grains, often used with copper brass alloy electrode, at 850℃-1150℃ with brzaing torch, high-frequency machine, brazing

Three row roller slewing ring bearing has three blocks from top to bottom and separate radial raceway , making each row roller can be determined exactly , which can bear a variety of loads at the same time and its load capacity is the largest one among t

Through the ISO9001:2000 international quality management system certification, the implementation of the Oil Ministry SY5182-87 standards.

1. Screen a single Screen, double-Screen, the contents of the Centre (the base), and other structural forms.

2.

Scissor lift:

1.The lifting height of the scissor lift is 4m ,6m, 8m,10m ,11m and so on. And the max height of the scissor lift is 18m

2.The capacity of scissor lift is 300kg,500kg,800kg,1000kg and so on. The Max capacity could be 7000kg.

3.The scisso

balancing machine,dynamic balancing machine

MODEL

Max. mass of workpiece

(kg)

Max.diameter of workpiece

（mm）

Distance between two bearing suppo

（mm）

Max.rotor

Diameter

（mm）

Balanncing speed min

（r/mm）

min. achievabler

Waste tire recycling equipment1Break waste tire into powder

2.tire size:650-1400mm

3,mesh size :8-100mesh

4.steel&rubber separated completely

waste tire recycling euipment

Deal with used tire into rubber powder(8-80mesh),steel and nylon.

Yangli machinery As a part product of Hangzhou Yangli Chemical Equipment CO., Ltd, machinery focuses on producing high cost performance steel building machinery, includes in steel roofing forming machine, steel tile forming machine, floor deck forming ma

Description :

This welding positioner make the workpiece at the best welding and fitting position , can become a real automatic welding machine cooperating with the manpulator .can also be the peripheral equipment of the robot and achieve the automation

BOWE FB302 copper solder paste is the latest developed a set of copper and the advantages of the new flux soldering solvent, its fluidity and permeability is stronger than other similar flux. And very good solve the hygroscopic and fluidity of powder, in

Specifications:

(1). Slot size (mm): 0.10,0.15,0.2,0.25,0.30-3mm

(2). Lengths: 3-12m

(3). Grades: Different grades suitable for tube well depths up to 300ft,600ft,900ft,and 1500ft.

(4). Material: Low Carbon Galvanized Steel (LCG) and Stainless Steel

specification of BY-600 welding positioner :

Model BY-600

Input Power AC220V 50Hz

Loading Capacity 0° / 90° 600Kg / 300Kg

Working table diameter 650mm

Working table height 675mm

Working table speed 0.1~1.8 r/m

Table rotation angle 0~90°

Working

offen used to Aluminum radiator, automobile air conditioner, temperature furnace spray welding,The cooker, electric kettle, heating, high frequency welding heat chassis

BOWE Brand FB202 Non-corrosive brazing solvent, is our unique to develop a kind of

We can provide not only continous slot screen or pipe base screen or pipe base screen, but all of your pipe, centralizer,sieve plate, water and gas strainer, and other accessories needed for completion and sand control. Well screen are manufactured by a

specification of BY-600 welding positioner :

Model BY-600

Input Power AC220V 50Hz

Loading Capacity 0° / 90° 600Kg / 300Kg

Working table diameter 650mm

Working table height 675mm

Working table speed 0.1~1.8 r/m

Table rotation angle 0~90°

Working

Phosphorus-Copper Brazing Alloy has features of good-flowing, low price and good workmanship, it needn't use flux. It appropriate for touch-welding, gas flame welding, high-frequency welding and welding inside stove, welding joint has better intensity an

Wire wrapped screen are manufactured by a v or wedge shapped wire around an internal array of longitudinal support rods. Each intersecing point of these wires is fusion welded. The v or wedge shapped profile wire wraps around the support rods over the fu

specifications of BY-5000 welding positioner :

Model BY-5000

Power Input AC220V/AC380V

Rotation Motor AC 2.2Kw

Tilt Motor AC 1.5Kw

Max. Capacity 5000 Kg

Center of gravity 300mm

Eccentricity 200mm

Table Dimension 1500mm

Rotation Speed 0.05--

Brazing best materials, low electrode (black electrode, phosphorus copper tin)

BOWE bo wei copper electrode material of copper and tin, phosphorus temperature: 62 degrees ~ 670 degrees, is a widely used alloys of copper brazing alloy, copper, brass, bra

Wire wrapped screen are manufactured by a v or wedge shapped wire around an internal array of longitudinal support rods. Each intersecing point of these wires is fusion welded. The v or wedge shapped profile wire wraps around the support rods over the fu

specifications of BY-200 welding positioner :

Model BY-200

Horizontal loading capacity 200 kg

Vertical loading capacity 100 kg

Working table diameter 345 mm

Working table height 415 mm

Working table tilting angle 0-90°

Working table speed 1-3.5/7

Characteristics: LvHan pure silk, aluminum content, have excellent experiment.it 99.5% corrosion resistance, high thermal conductivity and performance, as well as excellent machining performance. The processing of the anode material, need when ideal matc

Wire wrapped screen are manufactured by a v or wedge shapped wire around an internal array of longitudinal support rods. Each intersecing point of these wires is fusion welded. The v or wedge shapped profile wire wraps around the support rods over the fu

If you are looking for a welding positioned, turning roll , welding chuck, wire feeder or related weld positioning equipment then you have come to the right place !

Ji Nan North Equipment Co.,Ltd is a sino-foreign joint venture enterprise , which is l

My company can produce 45 degrees - 280 degrees between arbitrary temperature, accord with national security requirements of temperature alloy materials, the material can be changed in temperature control in the state, under normal melting, when the temp

Material: stainless steel, carbon steel

Features: 1) The slotted liner is a robust and cost-effective solution for long completions or low productivity wells

2) We offer straight and keystone slot types in the wide range of slotting patterns to

If you are looking for a welding positioned, turning roll , welding chuck, wire feeder or related weld positioning equipment then you have come to the right place !

Ji Nan North Equipment Co.,Ltd is a sino-foreign joint venture enterprise , which is l

We manufacture slotted pipe with different specifications professionally. This kind of products could be made-to-order. Welcome to cooperate with us

If you are looking for a welding positioned, turning roll , welding chuck, wire feeder or related weld positioning equipment then you have come to the right place !

Ji Nan North Equipment Co.,Ltd is a sino-foreign joint venture enterprise , which is l

Low-Carbon, Galvanized or Stainless Steel construction.

Provide optimum well development and access to the aquifer

Large open area

Water enters at lower velocity, reducing screen surface erosion and encrustation

Standard designs f

If you are looking for a welding positioned, turning roll , welding chuck, wire feeder or related weld positioning equipment then you have come to the right place !

Ji Nan North Equipment Co.,Ltd is a sino-foreign joint venture enterprise , which is l

We can manufacture of well screen,water filter,Johnson screen,pipe base screens,all of kinds pipes,centralizers,sieve plates,water and gas strainers,and other accessories needed for completion and sand control. We also export our products to America,Suda

If you are looking for a welding positioned, turning roll , welding chuck, wire feeder or related weld positioning equipment then you have come to the right place !

Ji Nan North Equipment Co.,Ltd is a sino-foreign joint venture enterprise , which is l

Specifications:

(1). Slot size (mm): 0.10,0.15,0.2,0.25,0.30-3mm

(2). Lengths: 3-12m

(3). Grades: Different grades suitable for tube well depths up to 300ft,600ft,900ft,and 1500ft.

(4). Material: Low Carbon Galvanized Steel (LCG) and Stainless Steel

If you are looking for a welding positioned, turning roll , welding chuck, wire feeder or related weld positioning equipment then you have come to the right place !

Ji Nan North Equipment Co.,Ltd is a sino-foreign joint venture enterprise , which is l

Specifications:

(1). Slot size (mm): 0.10,0.15,0.2,0.25,0.30-3mm

(2). Lengths: 3-12m

(3). Grades: Different grades suitable for tube well depths up to 300ft,600ft,900ft,and 1500ft.

(4). Material: Low Carbon Galvanized Steel (LCG) and Stainless Steel

If you are looking for a welding positioned, turning roll , welding chuck, wire feeder or related weld positioning equipment then you have come to the right place !

Ji Nan North Equipment Co.,Ltd is a sino-foreign joint venture enterprise , which is l

If you are looking for a welding positioned, turning roll , welding chuck, wire feeder or related weld positioning equipment then you have come to the right place !

Ji Nan North Equipment Co.,Ltd is a sino-foreign joint venture enterprise , which is l