40mm,32mm,50mm

copper wire type

heavy duty good quality

Heavy duty steel bar mesh welding machine

Type: WHJ-300-12

1-welded wire diameter: 6.0mm to 12.0mm

2-welded aperture: 100mm to 400mm, or more

3-welded width: at most 3000mm

4-welded length: 1000mm to 12000mm, or with your requirement

5-the transf

EDT hydraulic breaker has the following features

Powerful breaking energy increases working efficiency.

Minimum maintenance cost

Precision blow extends durability.

Thorough total inspection for high quality..

Superior performance with incr

Production line for Magnesium Oxide Board with fashionable design, reasonable structure, stable running manufactured board of even thickness in large production once through double- roller-extruding technology. This production line is equipped with shaki

ITEM TC5513 TC6010

Rated lifting moment KN.m 880 880

Working range m 3-55 3-60

Tip load t 1.3 1.0

Max load 8 8

Lifting height M 45-150 45-150

Li

ZL20G Wheel Loader

Characteristics

1.Using direct injection diesel engine as power, with easy startup and low oil consumption

2. Using special drive axle, with strong ability to overcome obstacle

3. Chassis uses hinged structure, with small turni

1 concrete plant use JS series mixer , the production of high efficiency, low failure rate, safe and reliable

2 Batching station can directly feed the 50 loader, high efficiency

3 Selection the industrial computers, interfa

Concrete mixer JS1500

Concrete mixer(JS1500)

Discharging capacity

1550L

Feeding capacity

2400L

Theory productivity (m3/h)

>=90

the diameter of the largest aggregate size

(pebble / gravel )

<=60/80

operation cycle time (s)

60s

Weight of

◆ Product characteristic：

TLZ-150 model works well drilling rig used self-propelled vehicle.Base is characterized by stability, walking ability, in the muddy construction site can be freely operation, equipped with generators, to achieve diesel generato

The areas of production and sales are faced with complex procurement and distribution networks, highly diversified product ranges and customer requirements that call for tailor-made solutions. Indeed, against the backdrop of shorter innovation cycles, in

Summary ：

Advantages:

Needless to replace the internals of the engine head,just handle the handle to operate it.

Easy to operate.More time-saving and effortless.Drilling faster and more efficient.

Have reached the Tip-top level of the same fiel

Technical Parameters

Materials:      Cold rolled steel coils / Color—coated steel coils / Pre—coated steel coils

Thickness:     0.25—1.0mm

Width:         Max100—1250mm

Line speed:    Max 20m/min

Machine Size: 1700mm  1300mm  1200mm  (length  Width

Electric hoist

SG-2 ELECTRIC HOIST.

* Capacity 125kg,250kg,500kg.

*Both load chain and wire rope model are available

*Most tensile safety hook without break.

*Compact and high efficient motor with heat protection device.

*Push button is with 24v

Electric hoist WT-G300B

The troughing rollers/idlers diameter could be 89mm, 108mm, 127mm, 133mm or any other size.

We can provide custom idlers on the base of samples or drawings the buyers provide with us. In addition, we can design the idler and idler group according to th

OEM NO.:1508533

1353072

Scania 4series 114 c/34005.96

Dump Truck

Truck Tractor

Platform Classis

Hydraulic Crawler Excavator

Features:

1) Japan YanMar diesel engine

2) Pump, valve and motor are all made in Japan

3) Cylinder is made in Korea

4) Luxury cabin with air conditioner is optional

Technical specifications:

1) Operating weight: 1,600kg

2

This machine adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading no-woven cloth, compounding and repressing. The equipment runs stablely with high automatization degree,

序号NO 项目ITEM 单位UNIT SC200/200参数 SC100/100参数

1 Rated Load额定载重量 Kg 2000/2000 1000/1000

2 Rated lifting speed额定提升速度 m/min 33 33

3 Max lifting height最大提升高度 m 150 150

4 Cage size吊笼内空（长*宽） m*m 3*1.3 3*1.3

5 Cage height吊笼内部高度 m 2.4 2.4

6 Starting cur

The rigidity of the rock: f=6-20

The diameter of the drill(mm): 80-140

The depth of the economical drill(m): 20

The work air pressure(Mpa): 0.7-1.4

The speed of turning around(rpm) :0-65

The advancing power(KN): 15

The dr

JS series concrete mixing machine is the twin-shaft compulsory mixer, It has the dual advantage of independent stand-alone operations and become one concrete station with PLD series batching machine. The JS series mixing machine can also support the hos

Concrete mixer JDY350

Concrete mixer(Js750)

Discharging capacity

750L

Feeding capacity

1200L

Theory productivity (m3/h)

>=35

the diameter of the largest aggregate size

(pebble / gravel )

<=40/60

operation cycle time (s)

72s

Wei

◆ Product characteristic：

TLZ-250 Rotary Drilling Rig used self-propelled vehicle, except with TLZ-150 advantages of water-drilling rig, there are scum of larger, footage quickly and with positive and negative cycle of pumping systems, stability, workin

The areas of production and sales are faced with complex procurement and distribution networks, highly diversified product ranges and customer requirements that call for tailor-made solutions. Indeed, against the backdrop of shorter innovation cycles, in

Summary ：

Advantages:

Needless to replace the internals of the engine head,just handle the handle to operate it.

Easy to operate.More time-saving and effortless.Drilling faster and more efficient.

Have reached the Tip-top level of the same fiel

Yangli machinery As a part product of Hangzhou Yangli Chemical Equipment CO., Ltd, machinery focuses on producing high cost performance steel building machinery, includes in steel roofing forming machine, steel tile forming machine, floor deck forming ma

HHXG Type Heavy Duty Electric Chain Hoist

Features:

A.Capacities form 500kg to 5,000kg.

B.Quality chain is supplied by FEC Japan.

C.Most tensile safety hooks without break

D.Compact and high efficient motor with heat protection device

E.Push button is

Features:

1) Complying with the IP54 and IP65 standards, handled with

emergency stop switch, and with brake and thermal protection device

2) Compact and artistic in appearance, unique design and excellent

performances, light weight, convenient for instal

1.Our roller is a conveyer roller component which will revolutionize the port, coal mine, mining & mine Power industry.

2. Our roller is eco-friendly since it can be recycled and lessens noise pollution.

3. Our roller retails at competitive prices.

4

Skid Steer Loader:

Features:

1)Overall dimension: 3145*1615*1935mm

2)Wheel base: 991mm

3)Ground Clearance: 253mm

4)Max. Lifting Height: 3670mm

5)Bucket pivot Max. Height: 2900mm

6)Max. dumping distance: 710mm

7)Bucket capacity: 0.36M3

8)Gradeability: 26

e production line for building moulding board can manufacture various new model building moulding board with materials, such as crop straw, stone powder and glass fiber after special technology. This new model building mouldling board has following advan

PLD series concrete batching machine is the front automatic dispensing equipment using togthetr with the mixing machine. It can be designed according to user ratio of auto-complete concrete sand, stone, cement and other ingredients 3-6 kinds of materials

◆ Product characteristic：

TLZ-250B type engineering drilling rig with self-propelled four-wheel-drive vehicle, except with TLZ-150 advantages of water-drilling rig, there are scum of larger, footage quickly and with positive and negative cycle of pumpin

Summary ：

Advantages:

Needless to replace the internals of the engine head,just handle the handle to operate it.

Easy to operate.More time-saving and effortless.Drilling faster and more efficient.

Have reached the Tip-top level of the same fiel

Low resistance coefficient, long lifetime, fine waterproof performance, high precision welding pipes, seamless tubes, steel plate

Specifications:

1) Overall operating weight: 13,000kg

2) Bucket capacity: 0.6m³

3) Engine: German Deutz diesel engine

4) Rated power: 85kW/2,000rpm

5) High climbing ability: 60%

6) Travel speed: 33/9/36 (H/L)km/h

7) Max. traction 76kN

8) Dimensions: 7,