|
Blue Sky Charge Controller Solar Boost 3024iL&3024DiL
|
|||||||||||||||
| USD $ 0.00 |
| EUR € 0.00 |
| GBP £ 0.00 |
| CHF SF 0.00 |
| AUD $A 0.00 |
Blue Sky Charge Controller Solar Boost 3024iL&3024DiL
Blue Sky Charge Controller Solar Boost 3024iL&3024DiL
12V / 24V MPPT charge controller
Patented Maximum Power Point Tracking technology allows Solar Boost 3024iL to increase charge current up to 30% or more compared to conventional charge controllers. Dont waste your money by throwing PV power away!
Solar Boost 3024iLs advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energys advanced IPN network interface are also included.
The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control.
Blue Sky Energys advanced Integrated PowerNet, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special communication hardware to operate.
| SPECIFICATIONS | Solar Boost 3024iL |
| Output Current Rating | 30 Amp @ 24 Volts / 40 Amp @ 12 Volts |
| Nominal Battery Voltage | 12 / 24VDC |
| PV Input Voltage | 57VDC maximum |
| Power Consumption | 0.35W Typical standby 1.0W Typical charge on |
| Charge Algorithm | 3-stage Bulk/Acceptance/Float Plus Equalize |
| Acceptance Voltage | 14.4VDC (range 14.0 14.8VDC , 10.0 40.0VDC ) |
| Float Voltage | 13.2VDC (range 13.2 13.8VDC , 10.0 40.0VDC ) |
| Equalization Voltage | 15.2VDC (range 10.0 40.0VDC ) automatic or manual operation |
| Auxiliary Output Function Aux. Battery charge Load Control Dusk-to-Dawn Cntrl | Single output field configurable as either: 20 Amp load controller or 2 Amp auxiliary battery charger |
| 2 Amp typical, same charge voltage as primary battery | |
| 20 Amp maximum; ON @ 12.6VDC / OFF @ 11.5VDC (Range 10.0 40.0VDC , or net battery amp-hours ) | |
| Variable Post-Dusk and Pre-Dawn timers , Range 0.5 - 20.0 Hours | |
| Temperature Compensation | Optional sensor adjusts charge voltage based on measured battery temperature,-5.00 mV/C/cell correction factor (Range -0.00 to -8.00 mV/C/cell ) sensor range -60 to +80C |
| Power Conversion Efficiency | 97% Typical @ 28 Volt 24 Amp Output |
| Cabinet Dimension | 6 7/8H x 6 5/8 W x 3 3/8D (17.4cm x 16.8cm x 8.59cm) |
| Analog Input Accuracy / Range | Battery & Aux. Battery voltmeters, 40.0VDC 0.50% FS PV voltmeter, 60.0VDC 0.50% FS |
| Communication | Blue Sky Energys proprietary IPN Network interface |
| Approvals | ETL Listed to UL STD. 1741, Certified to CAN/CSA STD. E335-1/2E, CE labeled, FCC part 15 certified |
| Environmental | -40 to +40C, 10 90% RH non-condensing |

China






